Apple Watch Series 5 Teardown – Thing You Must Know – Amir Articles

Spread the love
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Are you done with a teardown of Apple Watch Series 4? You must read about “Apple Watch Series 5 Teardown” before you plan to purchase it.

Introduction

In the teardown process, when Taptic Engine and connectors were separated although, Taptic Engine in both series are the same, their connectors have been improved to provide distinct tactile experiences.

Are you done with a teardown of Apple Watch Series 4? Now your curiosity is not letting you sit quietly, and you want to go through the tearing down of Apple Watch Series 5. Learning and struggle always let you soar high.

HIDDEN SIRI COMMANDS AND UNUSUAL RESPONSES – AMIR ARTICLES

In your mission, we are here not only to adore you but also to help you. So, gird your loin and take out the following tools from your toolbox. If you have a cell phone repair shop, you probably have all of the following tools:

  • Tweezers
  • Spudger
  • iOpener
  • technician razor set
  • tripod screwdriver
  • 64Bit Driver Kit
  • ESD gloves
  • Safety glasses

Have you gathered tools? Let’s begin:

Steps:

  • Turn your watch off.
  • Wear your gloves and safety glasses to protect your hand and eyes respectfully.
  • With a sharp blade, separate the screen and oversee the body.
  • To loosen the display adhesive, use an iOpener. This iOpener will provide heat to the adhesive screen and will make the teardown procedure smooth.
  • Take the help of a curved Blade and open the gap between the display and outer case.
  • Using the opening tool, remove the further gap between the display and the outer case.
  • To separate Force Touch Gadget and display, use an opening pick and slide under the display.
  • You will find the opening of the display just like the opening of a book.

Things to know:

Although there is little bit difference between Apple Watch Series 4 and Apple Watch Series 5 with thorough research, we find the following dissimilarities and improvements:

Display:

LTPO OLED Retina display with Force Touch. Moreover, the LTE antenna connector sports a slightly different form-factor, thus not permitting the display to work interchangeably.

UNBOXED A NEW IPHONE? HERE IS HOW YOU CAN SET IT UP – AMIR ARTICLES

Tighter display case:

Apple Watch Series 5 with a unique model number A2157 is clam- shelled shut, with improved tightness than series 4. It should be noted for customers that Apple Watch Series 5 costs high for the repairing of the screen.

Battery:

Apple’s manufacturing team has tried to improve the battery’s capacity compared to the last version. This watch has 10% more capacity with a new metal case. Moreover, this metal case helps to protect against accidental cases. As anticipated, the battery in this series is still glued-down. Hopefully, in later series, Apple Watch would be more secured by attaching a battery to the device with screws.

Efficient Power:

When both Apple Watches, i.e., series 4 and 5, were compared, we found that Apple Watch 5 has appeared with 10% more capacity. There are new display driver and power management IC, thus causing them to work more efficiently. The positive feature of this series about the battery is that the battery hasn’t taken the support of a large body to work proficiently.  

Easy battery replacement:

Battery replacement in Apple Watch 5 is no doubt stress-free. So, you can easily change your old and unwanted battery with ease.

Taptic Engine:

In the teardown process, when Taptic Engine and connectors were separated although, Taptic Engine in both series are the same, their connectors have been improved to provide distinct tactile experiences.

Storage:

Double the storage as compared to series 4, i.e., 32GB VS 16GB.

Residence of the components:

When the watch was further examined, we came to know that:

  • A digital crown, microphone, and side button were attached to the casing.
  • The heart rate sensor, ECG components, and charging coil was cling to the bottom plate

Other features:

Its integrated circuit is consist of the following features:

  • Skyworks 229-15 465371 1918 MX, most likely front-end module
  • YY NCJ 7NE (likely the acceleration + gyro sensor)
  • API 924 920

Specifications of Apple Watch Series 5

Specifications:

  1. Screen size 44mm, 448×368 pixels, 977sq mm display area
  2. 40mm, 324×394 pixels,759sq mm display area
  3. Display LTPO retina display, 1000 nits brightness
  4. Chipset S5 64-bit dual-core processor
  5. Wireless connectivity NFC, 802.11 b/g/n, Wi-Fi, Bluetooth, 5.0, GPS/Glonass/Galileo
  6. Sensors 32 g- force accelerometer, barometer, gyro, ECG electrode, heartbeat sensor, compass.
  7. Battery life 18 hours
  8. Storage space 32 GB

So, what makes Apple Watch Series 5 different from the Apple Watch Series 4?

Although both series seems to be “similar” in many ways, the following improvements in Apple Watch Series 5 make it different from the previous generation:

  • A built-in compass
  • 10% improvement in battery efficiency
  • The new always-on display
  • Water resistance up to 50 meters
  • Double storage
  • Improved navigation tools

Got any questions? Write them down in the comments section.

Please share “Apple Watch Series 5 Teardown – Thing You Must Know – Amir Articles” with friends and family.

Total Views: 47 ,

Spread the love
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Leave a Reply

Your email address will not be published. Required fields are marked *