How to Fix Amber Color LED Issue After Linksys Extender Setup

How to Fix Amber Color LED Issue After Linksys Extender Setup

Is your Linksys WiFi range extender rapidly showing amber color LED even after setting it up? If you nod in yes, then in this post we will provide you with some tested and proven solutions on how to fix the amber color LED issue after Linksys extender setup. Let’s get started!

Fix Amber Color LED on Linksys WiFi Range Extender

Router Connectivity Issue

If your Linksys WiFi range extender is unable to connect with your WiFi router, then the best way to fix the issue is to power cycle them. To power cycle your Linksys extender and router, do the following:

  • First things first, unplug your WiFi router and the Linksys WiFi range extender.
  • Wait for a few minutes.
  • Then, plug in your router first and after a couple of seconds, plug in your Linksys extender.

Relocate Your Devices

To fix amber color LED issue on your Linksys device, it is important to locate your extender and router at the center location of your house. Both the devices must be placed in close proximity. Besides, it is suggested to choose a higher and open location for your devices. Make sure it is away from the reach of neighboring WiFi.

Update the Firmware

An up-to-date firmware version on your Linksys device not only fixes the amber color LED issue but also lets you complete the extender setup process with great ease.

To perform Linksys extender firmware update process, follow the easy-to-execute steps highlighted below:

  • First and foremost, connect your router to your Linksys WiFi extender with the help of an Ethernet cable.
  • Once done, connect to Linksys WiFi setup.
  • Thereafter, open an up-to-date web browser on a laptop or computer.
  • Enter the default Linksys extender IP address or extender.linksys.com web address in the URL field.
  • Hit the Enter key once you’re done.
  • Linksys extender web-based setup page will display.
  • Select the Administration > Firmware Upgrade option.
  • Click on the Browse button.
  • Now, select the firmware file for your Linksys extender and click on Open.
  • Click on Start Upgrade.

A Word of Caution: To avoid any issue – it is recommended – do not interrupt the Linksys extender firmware update process in between.

Set Up Your Linksys Extender Properly

If you are still struggling with amber color LED on your Linksys WiFi range extender, then you must set it up properly. To set up your Linksys WiFi range extender:

  • Power on your Linksys extender and connect it to your router.
  • Visit the web-based setup page of your Linksys extender using its default IP or the web address.
  • Follow the on-screen instructions.

On the off chance if the troubleshooting tips listed above won’t help you resolve amber color LED on your Linksys extender, then resetting your device back to factory default values would be the better option.

How to reset Linksys extender?

To perform Linksys extender reset process, follow the steps outlined underneath:

  • Do not unplug your Linksys WiFi extender.
  • But make sure to disconnect your Linksys extender from your main router.
  • Then, locate Linksys WiFi extender reset hole and insert any pointed and thin object into it carefully and gently.
  • Hold the reset button on your Linksys WiFi extender for some time and release it.

Kudos! Your Linksys WiFi range extender has been reset successfully.

Once you have successfully reset you’re your Linksys WiFi range extender, try to reconfigure it again using the correct setup steps. In the event that the same issue continues to trouble you, don’t get hyped! Simply drop your queries into the comments section and we will reach you with a solution shortly.

Total Views: 361 ,
By Sachan Lathiya

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like