An ultimate way to expand the range and reach of your existing WiFi network is to cascade your Netgear routers. The term cascade router means that 2 or more routers are connected to each other wirelessly or using an Ethernet cable.
The cascade router process can be done in 2 simple ways:
- Connect an Ethernet port on the second router to an Ethernet port on the first.
- Connect the Internet port on the second router to an Ethernet port on the first.
Let’s dive in!
- First and foremost, decide which router will be the primary and which will be the secondary.
- Then, plug your secondary router first into a working wall outlet near to your PC or laptop.
- Connect your modem to your secondary router using an Ethernet cable or a wireless connection.
- Now, connect your secondary router to the primary one. For this, you have to use a well-maintained Ethernet cable. A wireless connection can also be used to connect your secondary router to the primary one.
Congrats! You have successfully cascaded your Netgear routers.
On the off chance if you are facing issues while connecting or cascading your Netgear routers, then apply a few troubleshooting tips highlighted below.
- Power Cycle Your Netgear Routers
Not only to fix issues with your Netgear routers you have to power cycle them but also to give them a fresh start, this process work well.
Thus, to power cycle your Netgear routers:
- First, unplug your routers from their power source. But, don’t forget to disconnect your Netgear routers from each other prior to initiating the process.
- Wait for 5 minutes.
- Plug in your Netgear routers back in. It is suggested to plug in your secondary router first and then the primary one.
- Let the LEDs on your Netgear routers become stable.
- To check the connection between your devices, open a PC or laptop and try to access the Netgear router login page using the default IP or the web address.
Refer to the Netgear router manual to get details about your router’s IP or the web address, if you are not familiar.
- Update Your Netgear Routers Firmware
This is one of the ultimate ways to fix any kind of issues related to your Netgear routers. Yes, update their firmware. Not only the firmware update process brings new features and enhanced security but also fixes various bugs. Thus, to update the firmware on your Netgear devices, visit the www.routerlogin.net login page. It is advised to first update the firmware on your secondary router and then on your primary router.
- Select the Best Location for Your Netgear Routers
The best location for your Netgear routers is the center-most location in your home. Apart from that, if you want to get the most out of your routers’ WiFi signals, we personally suggest – not to place your Netgear routers inside a cabinet or under a table. Moreover, plug in your secondary and your primary router in close proximity.
- To avoid unwanted access, it is suggested to change their default settings like username and password. Simply access the www.routerlogin.net login page and follow the on-screen instructions.
- Do not place your Netgear routers near to thick walls, corners, and windows. The higher and ventilated location would be the best place for your Netgear routers.
- Create a guest network for your relatives and friends who keep on asking for your router’s password.
After applying the troubleshooting tips highlighted above, try to initiate the cascade router process again. Just in case, you are unable to cascade your Netgear routers, feel free to drop your issues in the comments section.