If you’ve been following technology closely over the past couple of years, you know the fact that LG TVs are reliable, user-friendly and modern-day devices. But when you’re not sure what to do to fix the usual LG TV’s Wi-Fi turned off issue, your life might not look appealing when you encounter it. We’re here to assist you in avoiding an unpleasant experience.
How can I solve the LG TV WIFI turned off issue? Switch the TV off and on, turn it off, then change the time settings and then set DNS settings. If you want to use the final resort, you could reset the TV factory. You can turn off the Simplink and Quick Start features. If that doesn’t work you can try straightening the wires that connect into WiFi module. Also Read: how much does it cost to ship a tv
Therefore, there could be many possible causes when you face an LG TV WIFI turned off issue. Let’s look at the specifics of how you have to resolve the issue quickly.
What is the reason why LG TV WIFI Turned off?
If you’re LG television WIFI is disabled The first thing to check is to see if the WIFI setting is active or not, and also if you’re WIFI signal is sufficient. Someone might have switched it off without knowing it.
If it’s not then the TV’s software may not be current. Some TVs automatically install latest updates. Others don’t. If you’re in the second category, compatibility issues might be the cause.
Certain software bugs could be the cause. Additionally, incorrect dates and times and DNS settings may also block you from turning on your LG TV WIFI from turning on.
A reliable DNS server will be capable of converting the name of a web address into an IP address for web addresses. If none of these solutions work then the LG TV might be experiencing issues with the hardware.
How To Fix It
If you’ve taken the correct steps to turn on the connection then follow these instructions to correct the problem:
1. Try Turning the TV Off/On
Modern LG TVs do not have an option to reset the device. Therefore, if you suspect problems with software then you’ll have to try this:
- Physically disconnect your TV’s outlet for power.
- Wait for about 2 minutes.
- Connect your TV into.
Another term for this technique is power cycling, also known as soft reset. It’s highly efficient, and that’s why we would recommend it as the first option.
The TV has been reset. This is the first step since it’s straightforward and doesn’t require technical expertise. Additionally software bugs, they’re the primary factor in this connectivity issue.
Also Read: how much does a 65 inch tv weigh
2. Check Time Settings
Because your time and date settings could be the cause of the problem, you can try this to fix it:
- Go to Settings.
- Select the Generaland then Date and Time.
- Uncheck the box that will automatically set.
- Create the appropriate locale time, date and local hour manually.
3. Set DNS Settings
The DNS setting can help resolve the WIFI shut off issue. It is possible to do this by following the steps listed below:
- Click on the Menubutton followed by Settings on the TV’s display.
- Press on All Settings.
- Press on Network.
- Press on WI-FI Connection.
- Press on Advanced WI-FI Settings.
- Press on Edit.
- Enter an IP address of the IP range of your router in the address box. Enter the router’s IP address under the Subnet Mask.
- After that, type in the DNS address into the DNS Server field.
- Press Connect.
NOTE: DNS servers can be affected just like any other server. Therefore, if your DNS is at fault and there is nothing else that works then you can resolve it by adjusting your DNS server’s location manually. The positive side is that you are able to use Google’s 18.104.22.168 and 22.214.171.124 DNS servers at no cost.
To utilize 126.96.36.199 You must follow the same procedure as above. Once you have selected your DNS Server, enter 188.8.131.52 and save the modifications.
4. Factory Reset
If these methods failed then you can reset factory settings on the settings on your LG TV by following these steps:
- Go to Home.
- Select Settings.
- Select General Menu.
- Click on Reset To Initial Settings.
- Verify the reset.
We have another detailed piece on the same problem, in which we go over how to troubleshoot LG TV WiFi in general.
If none of the suggestions that are listed here have helped take a look this site.
5. Turn Off Quick Start/ Simplink Features
Try tweaking a few settings to see if these were the cause. On your remote, simply go to Settings>All Settings>General>Quick Start/Simplink>Off. Once you’ve done that you can turn off the TV and wait for a moment, then and then turn off the television and then turn it on.
6. Straighten The Wires Leading To The Wifi Module
All you have to do is pull away the top of the television off , then disconnect the connector from the WiFi module. Then, straighten the wires with your fingers.
Here’s what you’ll must do:
- Unscrew the top of your TV.
- Find the WiFi module as well as connect the ribbon cable with the blue tape atop it.
- Take off the blue tape, and straighten the fold-over WiFi cord.
- Simply straighten the other cables for WiFi modules that appear bent.
7. Reboot Your Router
Connect your router to the internet and locate the the reset switch>Use an object to hold on the reset lever for thirty seconds. Then release the button. Wait until the router is able to turn back on.
Certain routers come with a Reset button. Simply press the button and then wait for the router to reboot. Be sure to allow it some time to establish a reliable connection before connecting the LG TV to WiFi.
Another method of restarting your router disconnect it from source of power, then wait about one minute, and then reconnect it.
Also Read: how much does a 75 inch tv weigh
8. Update the Software
There are times when there could be updated software that can solve your WiFi issues Check the Settings on your TV, and then check for updates available.
- Click on The General menu.
- Scroll down, and then select About this TV.
- Verify to make sure that Automatic updates is turned on.
- Click to check for Updates.
- If you find an update then follow the instructions on page to install and download it.
How To Turn On the WiFi on LG TV?
If you are able to enable WIFI in the LG TV, you will not notice an issue with the technology when there’s no. This is why the knowledge is crucial. These are steps to follow to take to turn on the WIFI on in the correct method using the remote:
- Switch on you WIFI router.
- Click the button SMART button of the remote, and then navigate into the menu Home.
- Click on the Settings and then click OK.
- Select Network.
- Select WIFI Connection.
- Choose the WIFI provider from the available networks. networks that are available.
- Enter your password.
- Choose Connect.
If you’ve done all these instructions, you’ve connected your TV to the WIFI.
How to Turn On WIFI on an LG television without remote?
If you are unable to utilize your remote for some reason, you can switch off WIFI in your home TV using these steps:
- Choose a compatible Mouse
- Attach your mouse your TV via USB port. USB port
- Click on the physical button on your TV (You’ll see the input along with the two additional choices).
- Select the input option ( A new window will be displayed)
- If you are presented with a variety of choices, select Live TV..
- Move the mouse’s cursor towards the right side of the screen until you reach the menu.
- Select the preferred icon within the icon for channel.
- You’ll notice “you are not connected.” Follow the steps on the screen onto the next stage (The Network setting window will be displayed)
- Click on your router’s SSID and then enter your password.
- Once you’ve completed the settings, save everything by following the steps in the display.
It’s connected to your LG TV WIFI with no remote. If it’s not connected, then you have the right to think there’s something wrong in your network connection as well as the device.
How To Turn WIFI Back on LG Smart TV?
You’ve now fixed the issue and you may wish to turn on your WIFI back on to your LG Smart TV. To do that follow the steps below.
- Check that the Wi-Fi connection is on.
- Use the remote’s button that is a SMART button to go to Home.
- Choose the Settingsand click “OK.
- Select Network.
- Select WIFI Connection.
- Choose the WIFI networks from the available networks (Reduce the distance between your router and TV If you’re unable to locate the network you want to connect).
- Enter your password and click Connect.
You’ve switched your WIFI back on on your LG Smart TV
To summarize the first step you must do to ensure that you LG TV WiFi working and not shutting down is to turn off the power source on your TV. Unplug it from power source, and after waiting for about a minute, then plug it back into. Repeat the process for your router. It is nearly guaranteed to solve the problem.
If not, change the settings, and then factory set the device back to factory settings. One last thing you need to do is straighten the wires of the WiFi module. We will explain how to accomplish this in our article.