There are many different types of repairs for your garage door. For example, depending on your garage door’s age, you might need to have an Austin garage door repair by replacing its rollers, tracks, photo eye sensors, or the springs. Each repair will require a different set of tools and materials. Although these parts can cost anywhere from $5 to $200, more expensive repairs may require new tracks, springs, or panels. This article will cover some of the most common types of garage door repairs and the costs involved.
Rollers
Broken hinges, rollers, and tracks may require repair or replacement. If the rollers or tracks are noisy, lubricate them. Then, replace them if necessary. A malfunctioning photo-eye sensor can cause the door to fail to open or close. It can be a safety concern, especially if children or pets are inside the garage. The repair cost ranges from $125 to $400. Rollers and hinges should be replaced every five to seven years or when they become damaged.
Photo-eye sensors
Photo-eye sensors can be a simple DIY repair, or you can hire a professional to check them out for you. If they malfunction, a small LED light will indicate that they are working correctly. However, if the lights do not stay on for any period, the sensor has been bumped or is faulty. When this happens, it is time to contact a professional for garage door repair.
Roll-up door springs
Garage door repairs usually involve rolling-up or roll-down doors. These doors need springs to operate and are the most expensive to repair. Spring replacement is easy, but you should first learn the basics of garage door repair before you begin. If you’re unsure about the process, a professional like Austin’s Greater Garage Doors may be your best option. They are equipped with the proper tools and training to handle garage door spring replacement. Also, if your garage door is multi-door, you might want to hire someone who knows about these repairs, or it could be a dangerous endeavor.
Broken Springs: Among the most common garage, door repair needs are broken springs. While replacing a single spring may not require a professional, replacing a pair is a challenging task and should only be undertaken by experienced garage door technicians. In addition, broken springs can be dangerous, so always take photos of the mechanisms before attempting the repair. Also, unplug your garage door opener before tackling the repair.
Broken glass
The first step in garage door repairs is to inspect the window for broken glass. Remove any broken glass from the window and sandpaper it if necessary. Then, place the new glass in the window retainer and screw it. Remember to wear safety goggles and heavy gloves while cleaning the window. The glass insert may be made of plastic, so you will need to remove it if you break it. Next, measure the height and width of the frame opening and subtract an inch when determining the size of the new glass.
Misaligned sensors
If you’ve ever noticed that your garage door’s sensors aren’t working properly, you may be a victim of misaligned photo eyes. These cameras must be pointed in the same direction and at the same angle. Usually, you can identify if your sensors are out of alignment by looking for a blinking LED light on the exterior of each sensor. If this is the case, tighten the bracket holding up the LED light and bend it back into place. Once this is complete, your garage door should no longer blink.